Chrysler 300M Enthusiasts Club
  • What did you do to your car today?

  • General Discussions about the 300M
2020 Calendar Banner

Membership Banner

General Discussions about the 300M

Moderator: Moderators

User avatar
 #258711  by Brando26
 June 5th, 2011, 5:51 pm
Group, I thought it would be cool to have a continuing thread of what users do to their cars.

I'll start

Cleaned my k&n drop in, modified my drl module, ran the power wire for my E.L. inverter to the parking light wire, replaced a lame led, and vacuumed her out. Also working on another mod but was tooooo HOT!!!

Robert P, EasyRider300M liked this
User avatar
 #258715  by FIREM
 June 5th, 2011, 6:03 pm
Today ?? Finally unpacked from Indy :lol:
User avatar
 #258727  by DaleFicken
 June 5th, 2011, 6:55 pm
Changed WP/TB yesterday.. polished paint.. glued license plate light till I get a new one and added LED there. Oil change tomorrow!
User avatar
 #258729  by EasyRider300M
 June 5th, 2011, 7:00 pm
I took her out for a drive in the perfect 70 degree weather.
User avatar
 #258730  by Brando26
 June 5th, 2011, 7:13 pm
EasyRider300M wrote:I took her out for a drive in the perfect 70 degree weather.
Wow! it was 94 and thunderstorms here :( i finished what i was doing just in time!
User avatar
 #258732  by 300M_Brat
 June 5th, 2011, 7:15 pm
Cleaned K&N filter, Changed the 1/2" vent hose from the K&N tube to the block, Installed New amp and subs..
User avatar
 #258741  by Bill Putney
 June 5th, 2011, 8:20 pm
Changed oil and oil filter on both Concordes. They were overdue by about 2200 miles and 500 miles (relative to a 3000 mile change interval). Also got around to replacing the windshield washer pump from when I did a 180 into the ditch this winter (that was the only thing damaged - yay!). Also pulled a nail out of and plugged a tire. Things have finally settled down after the move and job change to take care of things like that.
User avatar
 #258743  by swalker
 June 5th, 2011, 8:48 pm
Does that mean you can come to Carlisle? :)
User avatar
 #258746  by Bill Putney
 June 5th, 2011, 8:56 pm
swalker wrote:Does that mean you can come to Carlisle? :)
Hah! I wish, Stan. I'm having hernia surgery the week before. :binky
 #258749  by cloud 9
 June 5th, 2011, 9:22 pm
Rotated the tires and did the rear brakes pads/shoes. I was originally just going to see what shape they were in after this crappy winter and all of the salt. The pads had enough thickness, but when I removed the caliper from the rotor, the pad on the piston side just fell off. The 3 prongs that hold the pad on the piston were completely rusted. Only love and luck was holding the pad on. Same thing on the other side, but only one prong fell off. Didn't check the fronts though...
User avatar
 #258756  by 300man86
 June 5th, 2011, 10:15 pm
Put a for sale sign on my M.

Well almost that is.
User avatar
 #258762  by alandw
 June 5th, 2011, 10:37 pm
I washed her today.
Isn't this what Twitter is for?? Time for a CLUB Twitter account !! :D
You do not have the required permissions to view the files attached to this post.
ThaJuggla817 liked this
  • 1
  • 2
  • 3
  • 4
  • 5
  • 465